Product Features:

• Bonds up to 12 sets of grips.
• Dries within 25 seconds.
• Designed to secure grip without any damage.
• Resealable bottle with applicator included.

Application Instructions:

• Clean and dry all surfaces.
• Apply a generous amount of glue to handlebar, barrel of grip and inside flange ends (avoid getting glue into ends of open ended grips).
• Install grips immediately and twist half a turn to evenly spread the glue.
• Glue dries within 10-25 seconds.
• Wipe off any excess glue at flange end.
• Wait 5 minutes before use.
• Once the glue has dried make sure the throttle turns freely. If there is any resistance due to excess glue - remove with a sharp knife.