RFX Race Kill Button CRF250 10-13 CRF450 09-12
Description
RFX Race Series Kill Buttons are designed as exact OEM replacement parts, ensuring a seamless fit and reliable performance.
Each kill button is supplied with the same couplings, fasteners, connectors, and precise cable lengths as the original component, guaranteeing hassle-free installation and compatibility.
Available for a wide range of bike models.
Product Features:
- OEM replacement
- Accepts all original connectors
- OEM cable length
Fitting Instructions:
- Start by removing the front number plate.
- Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
- Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
- Unclip the connector and remove the switch taking a note of the routing for the wiring.
- Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
- Loosely attach the new switch on to the handlebars in the desired position.
- Route the wires as per the old switch and clip the connector together.
- Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
- Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
- Re-fit your number plate.
Specifications
- Manufacturer Item No.
- FXKB1020055ST
- RaceFX Item No.
- FXKB 10200 55ST
Compatibility
Make | Model | Year(s) |
---|---|---|
HONDA | CRF 250 R (ME10) | 2010, 2011, 2012, 2013 |
HONDA | CRF 450 R (PE05) | 2009, 2010, 2011, 2012 |
RFX Race Kill Button CRF250 10-13 CRF450 09-12
Description
RFX Race Series Kill Buttons are designed as exact OEM replacement parts, ensuring a seamless fit and reliable performance.
Each kill button is supplied with the same couplings, fasteners, connectors, and precise cable lengths as the original component, guaranteeing hassle-free installation and compatibility.
Available for a wide range of bike models.
Product Features:
- OEM replacement
- Accepts all original connectors
- OEM cable length
Fitting Instructions:
- Start by removing the front number plate.
- Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
- Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
- Unclip the connector and remove the switch taking a note of the routing for the wiring.
- Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
- Loosely attach the new switch on to the handlebars in the desired position.
- Route the wires as per the old switch and clip the connector together.
- Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
- Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
- Re-fit your number plate.
Specifications
- Manufacturer Item No.
- FXKB1020055ST
- RaceFX Item No.
- FXKB 10200 55ST
Compatibility
Make | Model | Year(s) |
---|---|---|
HONDA | CRF 250 R (ME10) | 2010, 2011, 2012, 2013 |
HONDA | CRF 450 R (PE05) | 2009, 2010, 2011, 2012 |