Top of the page

RFX Race Kill Button KXF250 17-24 KXF450 16-24

Item No. 111416
RFX Race Series Kill Buttons are designed as exact OEM replacement parts, ensuring a seamless fit and reliable performance. Each kill button is supplied with the same couplings, fasteners, connectors, and precise cable lengths as the original component, guaranteeing hassle-free installation and
In stock

Description

RFX Race Series Kill Buttons are designed as exact OEM replacement parts, ensuring a seamless fit and reliable performance.

Each kill button is supplied with the same couplings, fasteners, connectors, and precise cable lengths as the original component, guaranteeing hassle-free installation and compatibility.

Available for a wide range of bike models.

Product Features:

  • OEM replacement
  • Accepts all original connectors
  • OEM cable length

Fitting Instructions:

  • Start by removing the front number plate.
  • Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
  • Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
  • Unclip the connector and remove the switch taking a note of the routing for the wiring.
  • Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
  • Loosely attach the new switch on to the handlebars in the desired position.
  • Route the wires as per the old switch and clip the connector together.
  • Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
  • Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
  • Re-fit your number plate.

Specifications

Manufacturer Item No.
FXKB2030055ST
RaceFX Item No.
FXKB 20300 55ST

Compatibility

This item is compatible with the following vehicle(s):
MakeModelYear(s)
KAWASAKIKX 2502023, 2024
KAWASAKIKX 250 (KX252A)2019
KAWASAKIKX 250 (KX252B)2020, 2021
KAWASAKIKX 250 (KX252C)2022
KAWASAKIKX 250 F (KX252A)2017, 2018
KAWASAKIKX 250 X2023, 2024
KAWASAKIKX 4502023
KAWASAKIKX 450 (KX450J)2019, 2020, 2021, 2022
KAWASAKIKX 450 F (KX450H)2016, 2017, 2018
KAWASAKIKX 450 X2023

RFX Race Kill Button KXF250 17-24 KXF450 16-24

Item No. 111416
RFX Race Series Kill Buttons are designed as exact OEM replacement parts, ensuring a seamless fit and reliable performance. Each kill button is supplied with the same couplings, fasteners, connectors, and precise cable lengths as the original component, guaranteeing hassle-free installation and
In stock

Description

RFX Race Series Kill Buttons are designed as exact OEM replacement parts, ensuring a seamless fit and reliable performance.

Each kill button is supplied with the same couplings, fasteners, connectors, and precise cable lengths as the original component, guaranteeing hassle-free installation and compatibility.

Available for a wide range of bike models.

Product Features:

  • OEM replacement
  • Accepts all original connectors
  • OEM cable length

Fitting Instructions:

  • Start by removing the front number plate.
  • Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
  • Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
  • Unclip the connector and remove the switch taking a note of the routing for the wiring.
  • Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
  • Loosely attach the new switch on to the handlebars in the desired position.
  • Route the wires as per the old switch and clip the connector together.
  • Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
  • Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
  • Re-fit your number plate.

Specifications

Manufacturer Item No.
FXKB2030055ST
RaceFX Item No.
FXKB 20300 55ST

Compatibility

This item is compatible with the following vehicle(s):
MakeModelYear(s)
KAWASAKIKX 2502023, 2024
KAWASAKIKX 250 (KX252A)2019
KAWASAKIKX 250 (KX252B)2020, 2021
KAWASAKIKX 250 (KX252C)2022
KAWASAKIKX 250 F (KX252A)2017, 2018
KAWASAKIKX 250 X2023, 2024
KAWASAKIKX 4502023
KAWASAKIKX 450 (KX450J)2019, 2020, 2021, 2022
KAWASAKIKX 450 F (KX450H)2016, 2017, 2018
KAWASAKIKX 450 X2023