RFX Race Mapping Button CRF250 15-17 CRF450 15-16
Item No. 111411
RFX Race Series Mapping Buttons are designed as exact OEM replacement parts, offering seamless compatibility and reliable performance. Product Features: Complete with OEM couplings, fasteners, and connectors. Exact OEM cable length for hassle-free installation. Suitable for a wide range of bikes.
In stock
Description
RFX Race Series Mapping Buttons are designed as exact OEM replacement parts, offering seamless compatibility and reliable performance.
Product Features:
- Complete with OEM couplings, fasteners, and connectors.
- Exact OEM cable length for hassle-free installation.
- Suitable for a wide range of bikes.
Fitting Instructions:
- Start by removing the front number plate.
- Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
- Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
- Unclip the connector and remove the switch taking a note of the routing for the wiring.
- Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
- Loosely attach the new switch on to the handlebars in the desired position.
- Route  the wires as per the old switch and clip the connector together.
- Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
- Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
- Re-fit your number plate.
Specifications
- Manufacturer Item No.
- FXKB1100055ST
- RaceFX Item No.
- FXKB 11000 55ST
Compatibility
This item is compatible with the following vehicle(s):
Make | Model | Year(s) |
---|---|---|
HONDA | CRF 250 R (ME10) | 2015, 2016, 2017 |
HONDA | CRF 450 R (PE07) | 2017, 2018, 2019 |
HONDA | CRF 450 RX ENDURO (PE07) | 2017, 2018, 2019, 2020 |
RFX Race Mapping Button CRF250 15-17 CRF450 15-16
Item No. 111411
RFX Race Series Mapping Buttons are designed as exact OEM replacement parts, offering seamless compatibility and reliable performance. Product Features: Complete with OEM couplings, fasteners, and connectors. Exact OEM cable length for hassle-free installation. Suitable for a wide range of bikes.
In stock
Description
RFX Race Series Mapping Buttons are designed as exact OEM replacement parts, offering seamless compatibility and reliable performance.
Product Features:
- Complete with OEM couplings, fasteners, and connectors.
- Exact OEM cable length for hassle-free installation.
- Suitable for a wide range of bikes.
Fitting Instructions:
- Start by removing the front number plate.
- Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
- Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
- Unclip the connector and remove the switch taking a note of the routing for the wiring.
- Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
- Loosely attach the new switch on to the handlebars in the desired position.
- Route  the wires as per the old switch and clip the connector together.
- Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
- Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
- Re-fit your number plate.
Specifications
- Manufacturer Item No.
- FXKB1100055ST
- RaceFX Item No.
- FXKB 11000 55ST
Compatibility
This item is compatible with the following vehicle(s):
Make | Model | Year(s) |
---|---|---|
HONDA | CRF 250 R (ME10) | 2015, 2016, 2017 |
HONDA | CRF 450 R (PE07) | 2017, 2018, 2019 |
HONDA | CRF 450 RX ENDURO (PE07) | 2017, 2018, 2019, 2020 |